Operating The Blade-Control Clutch; After Operation; After Operation Safety - Toro 23522 Operator's Manual

Operating the Blade-Control
Clutch
This machine is capable of cutting brush and saplings up to
1.8 m (6 feet) tall and 5.1 cm (2 inches) in diameter. The
cutting deck pivots to follow the ground contour as you move
the machine.
To engage the blade, use your right hand to open the safety
latch and then use your left hand to squeeze the blade-control
clutch to the left handle (Figure
To disengage the blade, release the blade-control clutch.
Figure 15
14).
g188811

After Operation

After Operation Safety

General Safety
•
Clean grass and debris from the machine to help prevent
fires. Clean up oil or fuel spills.
•
Allow the engine to cool before storing the machine in
any enclosure.
•
Never store the machine or fuel container where there is
an open flame, spark, or pilot light, such as on a water
heater or on other appliances.
Hauling Safety
•
Use care when loading or unloading the machine into a
trailer or truck.
•
Secure the machine from rolling.
15