Specifications - Toro 23522 Operator's Manual

Blade-Control Clutch
Use the blade-control clutch to engage and disengage the
mower blade.
Ignition Switch
The ignition switch has 3 positions: O
The key turns to S and moves back to R
TART
Turning the key to the O
FF
engine; however, always remove the key from the ignition
switch when leaving the machine to prevent someone from
accidentally starting the engine and to prevent the battery
from inadvertently draining
1. Off position
2. Run position
Throttle/Choke Lever
The throttle and choke controls are combined into 1 control
lever. The throttle controls the engine speed and has a
continuous-variable setting from S
choke by moving the lever past the FAST setting until it stops
Traction Control
Use the traction control to move the machine forward and
rearward with continuously variable speed.
Fuel-Shutoff Valve
Close the fuel-shutoff valve for transport, maintenance, and
storage.
Ensure that the fuel-shutoff valve is open when starting the
engine.
Parking Brake
The parking brake is located near the battery. To engage the
parking brake, pull the lever outward through the keyhole and
down to lock it in place (Figure
brake, lift up the lever and push it inward through the keyhole.
, R , and S
FF UN
upon release.
UN
("STOP") position shuts off the
(Figure 9).
Figure 9
3. Start position
to F . Engage the
LOW AST
10). To disengage the parking
.
TART
Hour Meter
g192199
The hour meter displays the number of hours of operation
that have been logged on the machine
1. Hour meter

Specifications

Note: Specifications and design are subject to change
without notice.
Length
Width
Height
Weight
Cutting width
11
Figure 10
(Figure 11).
Figure 11
227 cm (89 inches)
88 cm (35 inches)
101 cm (40 inches)
171 kg (376 lb)
71 cm (28 inches)
g195543
g186773