Figure 26 Cm 08 Basic Services – Caller Id Display (Continued) - NEC Univerge SV9300 Programming Manual

Issue 1.0
Figure 27 CM 15 Service Restriction Class A – Caller ID Display (continued)
32
Figure 26 CM 08 Basic Services – Caller ID Display (continued)
1. Click the Read button to get the current settings.
2. FD=603 Select 0 to provide Caller ID display.
3. Click Apply.
Command Line Example:
CM 08>603>0
1. Select station Service Restriction Class A and click Read to get the
current data settings.
2. YYY=400 Select 1 or 7 to display both name and number
simultaneously.
Spectrum Enterprise
(Caller ID Display on Analog Terminal)
SIP Trunk Programming Guide