Nec Pbx Configuration; Prerequisites; Sip Trunking Information From Sip Trunk Provider; Nec Univerge Sv9300 - NEC Univerge SV9300 Programming Manual

NEC PBX C
S 2
ECTION
This section provides information to NEC's solution providers and NEC Associates for
configuring an NEC UNIVERGE SV9300 to connect to a SIP Trunk service provider.
2.1
SIP Trunk Programming Guide
ONFIGURATION

Prerequisites

Before you configure the UNIVERGE SV9300, you must have the following
information available.
2.1.1

SIP Trunking Information from SIP trunk provider

Primary SIP Proxy Server IP Address and SIP account

information.
Number Plan, if applicable for the Point-to-Point Connection

Trunking DID(s)

The DID(s) are forwarded to the Public WAN IP address(s),
DNS or DNS SRV records of the PBX.
2.1.2

NEC UNIVERGE SV9300

SV9300 CPU software version V3.2.1 or higher

VOIPDB (PZ-64IPLC-A, PZ-128IPLC-A, GPZ-64IPLD or

GPZ-128IPLD)
SIP Trunk Port Licenses

Digital, IP and TDM Telephones

2.1.3

Installation Worksheet

Use the worksheet to record the information needed for setting up
the SIP Trunking service.
Issue 1.0
3