Sip Trunk Port Settings - NEC Univerge SV9300 Programming Manual

Issue 1.0
3.5
12

SIP Trunk Port Settings

All values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 7 CM 30 SIP Trunk Port Settings
1. Select each Voice Channel and click the Read button to get the current
data settings.
2. YY=00 Assign the same Trunk Route Number to each voice channel.
If multiple SIP trunk servers are in service, separate routes must be used for

each server.
3. Click Apply.
Command Line Example: Route 01
CM 3000>001>01
CM 3000>002>01
CM 3000>003>01
CM 3000>004>01
(Voice Trunk Route Number 01)
(Voice Trunk Route Number 01)
(Voice Trunk Route Number 01)
(Voice Trunk Route Number 01)
SIP Trunk Programming Guide
Spectrum Enterprise