Sip Trunk Profile Settings - NEC Univerge SV9300 Programming Manual

Issue 1.0
3.10
22

SIP Trunk Profile Settings

All values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 17 CM BA SIP Trunk Profile Settings
1. Select SIP Trunk Profile Number assigned by CM35 YYY=091 and
click the Read button to get current data settings.
2. YY=04/10 Enter ToS/DiffServ code in hexadecimal for SIP trunk control
(SIP packets). Vendor will advise if this setting is required.
3. YY=21 Select SIP trunk CODEC List.
YY=22 Select SIP trunk Payload Size.
4. YY=25 Select DNS server query option.
5. YY=30 (This setting will not be used for Spectrum Enterprise.) Enter
SIP server IP address when not providing DNS server query.
YY=31 Enter SIP trunk server port. Assign port 05060 to use port 5060.
Spectrum Enterprise
SIP Trunk Programming Guide