Did Digit Conversion Settings - NEC Univerge SV9300 Programming Manual

Issue 1.0
3.11
28

DID Digit Conversion Settings

All values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 22 CM 35 YYY=170~172 DID Digit Conversion Settings
1. Select the Trunk Route Number assigned to voice channels and click the
Read button to get current data settings.
2. YYY=170 Select 0 to use DID Development Table 1.
YYY=171 Select the number of digits to be converted.
YYY=172 Select the number of digits received.
3. Click Apply.
Command Line Example:
CM 35170>01>0
CM 35171>01>15
CM 35172>01>15
(DID Development Table 1)
(Default: 04 Digits
(Default: 04 Digits
SIP Trunk Programming Guide
Spectrum Enterprise