2-1-3 Procedure from Laser Marker Setting to Test Marking
1. Set the file No. to be marked.
The "File Selection" screen is displayed when starting the PC setting software.
1
Select the File No. "003" on the file selection
screen.
Pressing File No. 003 highlights the comments column,
and "003" is selected.
2
Input the file name into the [Comments].
Here inputs the "Product A" into the comment.
(Input the character using the keyboard of the PC.)
2. Input the character to be marked.
1
Press
The screen is changed into "Character Setting" one.
2
Adjust the cursor to the first line "01" of the
screen, and press
* Re-adjusting the cursor to the first line (01) and
then pressing (double-clicking) the same cursor
performs the same operation.
.
.
EDIT
49