4-2-2
RS-232C Connector
In case of controlling the laser marker with the serial communication using the RS-232C, the "RS-232C connector" is
used.
Laser Marker side
Laser Marker Side Connector Type
User Side Connector Type
4-2-3
Specification for RS-232C
Connector
Synchronization Method
Communication Method
Stop Bit
Data Bits
Baud Rate
Parity
Check Sum
Delimiter
Flow Control
Reception Timer
Refer to "3-14-1 Environmental Setting Related to Laser Marker" (P.150) for details of the setting
of the communication condition.
REFERENCE
No
Signal Name
1
Reserved
2
RXD(RD)
3
TXD(SD)
4
Reserved
5
GND(SG)
6
Reserved
7
Reserved
8
Reserved
9
Reserved
: Male D-sub 9 pin (No. 4-40UNC-inch screw, female)
: Female D-sub 9 pin (No. 4-40UNC-inch screw, male)
D-SUB 9 pin, male
Asynchronous
Full duplex communication method
1 bit/2 bits
8 bits fixed
1200/2400/4800/9600/19200/38400
None/even/odd
NA/available
CR + LF/CR
None (three-wire method)
Reception timeout monitoring available (10 seconds for reception)
Function
System reserved
Received data
Sent data
System reserved
Signal ground
System reserved
System reserved
System reserved
System reserved
167