Pc Control Mode - Panasonic LP-310 Operation Manual

3-11-2 PC Control Mode

This product has two types of the control mode, PC control mode and remote (external control).
When turning on the power supply of this product, the remote mode is activated.
CHECK
The PC control mode is the mode that the laser marker is controlled under PC control with the laser marker
connected to the PC. The test marking, guide display, sending and reading of each setting, etc. are performed in
PC control mode.
(1) Shift from the remote mode
Even if the laser marker is started with the PC connected, it can be changed into PC control mode by the LP-
310 setting software.
1 "Mode" - "PC CONTROL"
2 Click
By clicking either "1" or "2", the dialog box for confirming whether to set the laser marker into PC control mode
or not is appeared.
When selecting "Yes", "PC Control" button is changed to "Remote" button.
When returning the mode of the laser marker to the PC control mode, click "Remote" button.
146
.