Panasonic LP-310 Operation Manual page 184

5. Status request (code: STS)
(1) Status request
This command reads out the operation status of the laser marker.
STX STS
As for the response data, either normal reception response data or abnormal reception response data is
returned.
Refer to "Response Data" (P.174) for details of the abnormal reception response data.
Status request response

STX STS
Ready
Description of data

Name
Ready
Shutter
Interlock
connector
Laser radiation
stop
Counter end
Error occurred
status
6. Marking trigger (code: MRK)
(1) Marking trigger
This command marks the file under selected by file number change command (FNO) once.
STX MRK
As for the response data, either normal reception response data or abnormal reception response data is
returned.
Refer to "Response Data" (P.174) for details of both normal reception response data and abnormal recep-
tion response data.
184
R (Check sum)
A Data (6 Bytes)
Shutter Interlock connector
Data
length
1 Indicates the marking ready status.
1 Indicates the shutter lever status.
1 Indicates the interlock connector status.
Indicates the laser radiation stop input of the
1
I/O connector.
Indicates the counter current value is reached
1
to the counter end value.
1 Indicates the error is occurred.
S (Check sum)
Delimiter
(Check sum)
Laser radiation Counter end
stop
Outline
Delimiter
Delimiter
Error occurred
status
Content
"0"•••Marking busy
"1"•••Marking ready
"0"•••Shutter closed
"1"•••Shutter opened
"0"•••Interlock occurred
"1"••• No interlock occurred
"0"•••Laser radiation stop: OFF
"1"•••Laser radiation stop: ON
"0"•••Current value<end value
"1"•••Current value = end value
"0"•••Error occurred
"1"•••No error occurred