Glossary - Panasonic LP-310 Operation Manual

Glossary

Some terms of the laser marker are specific to the laser marker and are difficult to understand. There is a summary of the outlines
of such terms and the pages in which the terms are mentioned in this operation manual.
Term
LP-310 Setting Software
Radiation safety standard for
laser products
Performance standards for
light emitting products
Language Type
Environment Setting
File Selection
Character Setting
Function Setting
Marking Condition
Laser Setting
Image Display
Guide Indication
Test Marking
Send/Read
PC Control/Remote
209
This is the software needed for setting the characters and
conditions to be marked by the laser marker LP-310.
These are the standards established for using the laser safely.
Products are classified in accordance with the degree of dan-
ger, and LP-310 is classified into Class 4, the highest class.
The language displayed by the setting software can be
switched between Japanese and English.
Caution:Though the language is switchable between Japanese and
The operational environment of the laser marker is set.
Laser marker : The internal clock, system offset, RS-232C
PC
The marking file to be edited/set is selected.
The character string and function character to be marked are
set.
The condition for function set at the character setting is set.
The condition for character string or CAD files to be marked in
relation to the size and position are set.
The output and speed of the laser for marking are set.
The character string and size and position of the CAD file cab
be confirmed before marking.
The actual character string and condition are tranced by the
guide laser before marking. This function is available for
rough alignment, etc. (Guide indication is available only when
the shutter lever is closed or set to the guide laser side.)
The test marking is performed with the characters and condition
the user set. This function is useful for fine-adjusting the mark-
ing data on the actual marked work.
The data created by the setting software is transferred to the
File Transfer
laser marker. This operation enables to mark in remote mode.
The files already transferred to the laser marker can be confirmed,
File List
and displayed in the form of the list.
The backup file of the marking data transferred to the laser
Backup marker can be created, and saved into the personal computer.
The backup file is saved with the extension ".LLB".
Restore The backup file can be written back to the laser marker.
The button to be displayed on the screen is differed depending on
the status of the laser marker.
When the laser marker is in remote mode
When the laser marker is in PC control mode:
PC Control
Remote
Outline
English on Japanese Windows, this language switching
function is not compatible with English Windows, that is,
only English is available for displaying.
conditions of the laser marker can be set.
: The size of the screen for displaying the setting
software and the font of the character to be
marked can be set.
: Indicates that the laser marker is in the controlled
status from the personal computer. The test mark-
ing, transfer•read of the guide display data are
performed in this PC control mode.
: Indicates that the laser marker is in the automatic
control mode for marking start with the input signal
sending from the external device.
: