Canon imageFORMULA ScanFront 400 Set Up And Operation Manual page 74

• User name/Password
Enter the user name and password for logging in to the
FTP server.
IMPORTANT
Enter the user name and password of an account with write
permission for the FTP server.
• Save password
Save the entered password.
• Use Passphrase
Use Passphrase when [Private Key Authentication] is
selected as the [Authentication Method].
• Passphrase
Enter Passphrase.
• Save
Save the entered passphrase.
• Fingerprint
Enter the fingerprint of the Private Key.
IMPORTANT
Always enter the fingerprint when [Protocol] is set to [SFTP].
• Confirmation
Confirm the fingerprint.
• Use FTP proxy
Traverse the firewall via an FTP proxy server to connect
to an external FTP server. Configure settings for the
proxy server in the [FTP Proxy] screen. (Refer to p. 143
of the ScanFront 400 INSTRUCTIONS.)
• Use passive mode
Use passive mode for sending to the FTP server.
74
Chapter 4 Operating Procedures
IMPORTANT
Use passive mode when normal communication with the FTP
server cannot be established. However, be aware that
communication may not be possible if the network is not
functioning properly.
Fax Registration Screen
• Name
Enter the name to appear in the address book.
• Fax number
Enter the recipient fax number.