Flow Of Scanner Operations - Canon imageFORMULA ScanFront 400 Set Up And Operation Manual

1.

Flow of Scanner Operations

The procedure and screen transitions for the process from turning the scanner ON, to sending an image file are as follows. For
descriptions of the various settings, refer to the appropriate reference pages.
No user is registered
* When no user is registered and only
the Shared Address Book and Shared
Job Button are used
Administrator Settings screen
(See p. 29.)
User Settings screen
(See p. 80.)
Password setting screen
(Refer to p. 157 of the ScanFront
400 INSTRUCTIONS.)
* The administrator password is
registered in the Administrator
Settings screen, and the user
password is registered in the User
Settings screen.
Scanning finishes (A document confirmation message appears) (See p. 68.)
The image is sent
without the address
being confirmed.
Send (The screen displayed after sending differs depending on the Send Settings)
Home screen
52
Chapter 4 Operating Procedures
Turn the power ON (See p. 53.)
Users are registered (device/server authentication)
Login screen (See p. 55.)
Home screen
(See p. 59.)
Address selection screen
(See p. 62.)
Scan / Send Settings screen (Refer to p. 85 of the ScanFront 400
INSTRUCTIONS.)
Scan (The process after scanning differs depending on the Send Settings)
(Refer to p. 98 of the ScanFront 400 INSTRUCTIONS.)
Send/Image Confirmation screen (See p. 68.)
Address Confirmation screen (See p. 70.)
(Refer to p. 98 of the ScanFront 400 INSTRUCTIONS.)
Job Button screen
* Set the screen that appears after login in the user settings.
* When you use server authentication, the user that logged in
is registered automatically.
Job Button screen
* Users restricted by [Use only Job
(See p. 60.)
Buttons] in the function
restrictions cannot scan from the
Home screen.
Scanning starts immediately after a
job button is pressed.
The document
After scanning of the
and image are
document ends, the image is
not checked
sent as is and the process
ends.
Login screen
* Send Settings are also
applied to job buttons.