Canon imageFORMULA ScanFront 400 Set Up And Operation Manual page 49

4.
Pull out the jammed document in the direction that
seems the easiest to remove it.
5.
Close the panel unit and then place the document
again.
6.
Press [Continue] to resume scanning.
IMPORTANT
• If paper jams or double feed errors occur, set [Document type]
to [Extra-thin paper] in the Detailed Settings screen. In
addition, limit the number of documents placed on the scanner
to about 10 sheets.
• A dirty or worn feed roller, or documents stuck together as a
result of static electricity are common causes of paper jams or
double feed errors.
If the feed roller is dirty, clean it. If paper jams or double feed
errors continue to occur even after cleaning, purchase an
Exchange Roller Kit and replace the rollers (feed roller and
retard roller). (Refer to p. 181 of the ScanFront 400
INSTRUCTIONS.)
49
Chapter 3 Handling