Canon imageFORMULA ScanFront 400 Set Up And Operation Manual page 68

6.
Press [Start] to start scanning.
Scanning stops after the document has been scanned.
IMPORTANT
• If [Send the files immediately after scanning] is set to [ON] in
Send Settings of the Scan / Send Settings screen, scanning
ends without displaying the continue to scan confirmation
screen, and the address confirmation screen of Step 10
appears.
• When the confirmation message is left displayed and the
scanner transitions to Low Power Mode, all of the data
scanned up until that point is discarded. (Refer to "Adjust the
wait time until the Low Power Mode." on p. 152 of the
ScanFront 400 INSTRUCTIONS.)
68
Chapter 4 Operating Procedures
7.
Check the document and go to the next step.
• Press [Complete] to go to the Send screen.
• Press [Continue] to resume scanning.
• Press [Cancel] to cancel the scanned images and return to the
Scan / Send Settings screen.
8.
Check the scanned images.