Configuring The Date And Time And Confirming The Time Zone - Canon imageFORMULA ScanFront 400 Set Up And Operation Manual

❏ Configuring the Date and Time and
Confirming the Time Zone
When you finish configuring the network settings, set the
date and time and confirm the time zone.
For details on other settings, refer to the ScanFront 400
INSTRUCTIONS (electronic manual).
IMPORTANT
Make sure that the time zone is set to your region of use. If the
time zone is set to the wrong region, the recorded sending times
and time stamps for image files will not match the time setting
displayed on the scanner.
1.
Press [Date/time settings].
The Date/time screen appears.
32
Chapter 2 ScanFront Setup
2.
Configure the date and time.
Hint
To change a setting, press the pull-down menu of the target item
and change the setting.
3.
Press [OK] to restart the ScanFront.