Network Settings - Canon imageFORMULA ScanFront 400 Set Up And Operation Manual

❏ Network Settings
Follow the procedure below to confirm and configure the
device name and IP address needed to connect the scanner
to a network.
IMPORTANT
• The device name is the name used to identify the scanner on
the network and is set to the 14 alphanumeric characters of
the SF+MAC address by default. When changing this setting,
make sure to select a unique name that is different from those
of all other devices.
• Under default settings, the IP address is assigned
automatically by the DHCP server. When a DHCP server is not
used, clear the [DHCP server Enable] check box, and enter a
fixed address. For details, contact your network administrator.
• The IP address is used for the URL when accessing the
scanner from an external terminal's web browser. Be sure to
write down the IP address in case you forget it.
1.
Press [Administrator setting].
The [Administrator Password] input box appears.
2.
Press [OK] to display the [Administrator setting]
screen.
No administrator password is set by default.
3.
Press [Device Configuration].
Chapter 2 ScanFront Setup
29