System Requirements - Canon Wireless LAN Board-B2 User Manual

System Requirements

This section describes the system requirements of the Wireless LAN Board,
1
including the types of access points and authentication servers it supports.
IMPORTANT
For information on the wireless LAN devices that can communicate with the product, see
the Canon Web site (http://www.usa.canon.com/ for the U.S.A.,
http://www.canon-europe.com/ for the UK, or http://www.canon.com/ for other countries/
regions).
NOTE
For information on the system requirements for printing and sending faxes, and the
network environments the machine can use, see e-Manual > Network.
■ Access Point
Standard
Frequency Band
Encryption
and
Authentication
Method
*1 The WEP key used with the Wireless LAN Board is a 40-bit or 104-bit key.
1-4
System Requirements
WEP (Wired Equivalent Privacy) Supports 64-bit and 128-bit WEP.
WPA (Wi-Fi Protected Access)/
WPA2-PSK (Pre-Shared Key)
802.1X/EAP (Extensible
Authentication Protocol) + WEP
WPA/WPA2+802.1X/EAP
IEEE802.11b, IEEE802.11g
2.4 GHz band (ISM (Industrial
Scientific Medical) band)
Complies with WPA and 802.11i
(WPA2) standards.
Supports 802.1X authentication and
Dynamic WEP. Requires a RADIUS
server.
Complies with WPA and 802.11i
(WPA2) standards, and supports
802.1X authentication. Requires a
RADIUS server. Includes WPA/WPA2
Enterprise.
*1