Table of Contents
Advertisement
5.4 Entering User Information
Refer to the menu map in Figure 78 on page 109 and to Figure 52 on page 57 (the Configuration Menu screen) to enter
the following types of user information:
•
User Functions
(see "Entering User Functions" on page 67)
•
User Tables
(see "Entering User-Defined Tables" on page 69)
•
User Constants
•
Saturation Constants
5.4.1 Entering User Functions
User Functions permit the programming up to four mathematical equations on each channel. Any parameter on any
channel can be used to calculate a different parameter. To enter a new user function or to edit an existing function,
complete the following steps:
User Function
1. Tap the
Function Setup screen (see Figure 60 below).
Channel
2. Tap the
moisture.IQ User's Guide
(see "Entering User Constants" on page 70)
(see "Entering Saturation Constants" on page 71)
button on the Configuration Menu screen (see Figure 52 on page 57) to open the User
Figure 60: User Function Setup Screen
button to select the channel where the function will be applied.
Chapter 5. Using the Configuration Menu
67
Advertisement
Table of Contents
