Chapter 1. Installation and Wiring
1.9.3a
M-Series Probes (cont.)
Note: Additional M-Series probes may be connected to
right side of the back panel.
If you connect a probe to the wrong channel, you can either reconnect the probe to the assigned channel or reconfigure
the current channel as described in "The Probe Configuration Screen" on page 58.
WARNING! The M-Series probe may not be capable of withstanding the 500V insulation rating. This
must be taken into account in any installation in which it is used.
18
Module A - CH1
Module A - CH2
Module A - CH3
Figure 13: M-Series Probe Connections
M-Series Probe Connections
CH4
CH5
CH6
,
and
in the
Module B
connector group on the
moisture.IQ User's Guide