Dell iDRAC6 User Manual page 354

Table A-18. getraclog
Command
getraclog -i
getraclog
Synopsis
racadm getraclog -i
racadm getraclog [-A] [-o] [-c count ] [-s start-
record ] [-m]
Description
The getraclog -i command displays the number of entries in iDRAC6 log.
NOTE:
If no options are provided, the entire log is displayed.
The following options allow the getraclog command to read entries:
Table A-19. getraclog Subcommand Options
Option Description
-A Displays the output with no headers or labels.
-c Provides the maximum count of entries to be returned.
-m Displays one screen of information at a time and prompts the user to
continue (similar to the UNIX more command).
-o Displays the output in a single line.
-s Specifies the starting record used for the display.
Output
The default output display shows the record number, time stamp, source, and
description. The timestamp begins at midnight, January 1 and increases until
the managed server boots. After the managed server boots, the managed
server's system time is used for the timestamp.
354
RACADM Subcommand Overview
Definition
Displays the number of entries in iDRAC6 log.
Displays iDRAC6 log entries.