Racadm Subcommands - Dell iDRAC6 User Manual

CAUTION:
You may encounter errors if you use an older version of RACADM to query iDRAC6
with the latest firmware. Install the RACADM version shipped with your latest
Dell™ OpenManage™ DVD media.

RACADM Subcommands

Table 15-1 provides a description of each RACADM subcommand that you
can run in RACADM. For a detailed listing of RACADM subcommands
including syntax and valid entries, see "RACADM Subcommand Overview."
Table 15-1. RACADM Subcommands
Command
arp
clearasrscreen
coredump
coredumpdelete
clrraclog
clrsel
config
fwupdate
getconfig
getniccfg
getraclog
getractime
getsel
getssninfo
getsvctag
getsysinfo
242
Using the RACADM Command Line Interface
The latest iDRAC6 firmware supports only the latest RACADM version.
Description
Displays the contents of the ARP table. ARP table entries
cannot be added or deleted.
Clears the last crash (ASR) screen.
Displays the last iDRAC6 core dump.
Deletes the core dump stored in iDRAC6.
Clears iDRAC6 log. After clearing, a single entry is made to
indicate the user and time that the log was cleared.
Clears the managed server's System Event Log entries.
Configures iDRAC6.
Updates iDRAC6 firmware.
Displays the current iDRAC6 configuration properties.
Displays the current IP configuration for the controller.
Displays iDRAC6 log.
Displays iDRAC6 time.
Displays SEL entries.
Displays information about active sessions.
Displays the service tag.
Displays information about iDRAC6 and the managed server,
including IP configuration, hardware model, firmware
versions, and operating system information.