Reset To Default - Dell iDRAC6 User Manual

Table 19-2. Lan User Configuration Screen (continued)
Item
Auto–Discovery
(continued...)
Account Access
IPMI LAN Privilege Select between Admin, User, Operator, and No Access.
Account User Name Press <Enter> to edit the user name and press <Esc> when
Enter Password
Confirm Password

Reset to Default

Use the Reset to Default menu item to reset all of iDRAC6 configuration
items to the factory defaults. This may be required, for example, if you have
forgotten the administrative user password or if you want to reconfigure
iDRAC6 from the default settings.
NOTE:
In the default configuration, iDRAC6 networking is disabled. You cannot
reconfigure iDRAC6 over the network until you have enabled iDRAC6 network in
iDRAC6 Configuration Utility.
306
Using iDRAC6 Configuration Utility
Description
Before adding your Dell system to the network and using the
auto–discovery feature, ensure that:
• Dynamic Host Configuration Protocol (DHCP)
server/Domain Name System (DNS) are configured.
• Provisioning Web services is installed, configured, and
registered.
Select Enabled to enable the administrator account.
Select Disabled to disable the administrator account.
you have finished. The default user name is root.
Enter the new password for the administrator account.
The characters are not echoed on the display as you enter them.
Re-enter the new password for the administrator account.
If the characters you enter do not match the characters you
entered in the Enter Password field, a message displays and
you must re-enter the password.