Batteries - Dell iDRAC6 User Manual

Batteries

The Batteries screen displays the status of the system board coin-cell battery
that maintains the Real-Time Clock (RTC) and CMOS configuration data
storage of the managed system.
Temperatures
The Temperatures screen displays the status and readings of the on–board
ambient temperature probe. Minimum and maximum temperature
thresholds for warning and failure states are shown, along with the current
health status of the probe.
NOTE:
Depending on the model of your server, temperature thresholds for warning
and failure states and/or the health status of the probe may not be displayed.
Voltages
The Voltage Probes screen displays the status and reading of the Voltage
probes, providing such information as the status of the on-board voltage rail
and CPU core sensors.
Power Monitoring
The Power Monitoring screen enables you to view the following monitoring
and power statistics information:
• Power Monitoring — Displays the amount of power being used (one
minute average power value measured in AC watts) by the server as
reported by the System Board Current Monitor.
• Amperage — Displays the current consumption (AC in Amperes) in the
active Power Supply unit.
• Power Tracking Statistics — Displays information about the amount of
power used by the system since the reading was last reset.
• Peak Statistics — Displays information about the peak amount of power
used by the system since the reading was last reset.
• Power Consumption — Displays the average, minimum, and maximum
power consumption, and the maximum and minimum power times in the
system for the last minute, hour, day, and week.
• Show Graph — Displays a graphical representation of power consumption
for 1 Hour, 24 Hours, 3 Days, and 1 Week.
Viewing the Configuration and Health of the Managed Server
177