Huawei R240D Hardware Installation page 9

R240D
Hardware Installation and Maintenance Guide
Figure 1-2 Indicator on the R240D


Table 1-2 Description of the indicator on the R240D
Type
Default status after
power-on
Software startup
status
Running status
Issue 03 (2016-01-26)
The indicator is located inside the panel, which turns on after the AP is powered on.
Indicator colors may vary slightly at different temperature.
Color
Green
Green
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status
Steady on
Steady on after
blinking once
Blinking once every
2s (0.5 Hz)
Blinking once every
5s (0.2 Hz)
1 Product Overview
Description
The AP is just
powered on and the
software is not
started yet.
After the system is
reset and starts
uploading the
software, the
indicator blinks
green once. Until the
software is uploaded
and started, the
indicator remains
steady green.
The system is
running properly,
the Ethernet
connection is
normal, and STAs
are associated with
the AP.
The system is
running properly,
the Ethernet
connection is
3