Huawei R240D Hardware Installation page 45

R240D
Hardware Installation and Maintenance Guide
Step 10 Push the jacket towards the metal shell until the metal shell is covered. This completes the
assembly of one end of the cable, as shown in Figure 5-27.
Figure 5-27 Pushing the metal shell
Step 11 To complete the assembly of the other end, repeat
----End
Assembling an Unshielded RJ45 Connector and Ethernet Cable
Context
Figure 5-28 shows the components of an unshielded RJ45 connector and cable.
Figure 5-28 Components of an unshielded RJ45 connector and cable
A. Plug of connector
Procedure
Step 1 Remove a 16-mm (0.63 in.) long section of the jacket, as shown in Figure 5-29.
Issue 03 (2016-01-26)
A
B
C
B. Jacket
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 1 through Step 10.
C. Twisted-pair wires
5 Appendix
39