Lubrication; Greasing The Bearings And Bushings - Toro Groundsmaster 5900 Operator's Manual

Figure 85
1. Slide the cover out between the lift arm and roller.
Installing the Inner-Wing-Deck
Covers
1. Lower the wing deck onto a level surface.
2. Slide the cover into position by guiding the rear
edge between the lift arm and the roller.
3. While sliding the cover away from the traction
unit, guide the outside edge under the front and
rear brackets on the deck.
4. Align the deck mounting posts with the holes in
the cover and lower the cover into position.
5. Install the bolt securing the belt cover, if so
equipped.
6. Engage the deck-cover latch.

Lubrication

Greasing the Bearings and
Bushings
Service Interval: Every 50 hours—Lubricate all
The machine has grease fittings that you must
lubricate regularly with No. 2 lithium grease. Also,
lubricate the machine immediately after every
washing.
g013894
Traction Unit
•
2 impact arms
•
2 front deck-lift-cylinder pivots
•
2 side deck-lift-cylinder pivots
•
4 steering-cylinder-ball joints
•
2 tie-rod-ball joints
•
2 king-pin bushings
•
1 rear axle-pivot bushing
66
grease fittings.
(Figure 86)
(Figure
(Figure
(Figure
(Figure 87)
(Figure 87)
(Figure 88)
86)
86)
87)