Videographic Recorder
SM1000
IM/SM1000 Issue 11
Select an alarm Enable source. When the 'Enable source' is
active, the alarm is enabled. When the source is inactive the
alarm is disabled. If set to 'None' the alarm is always enabled.
Note. For Delayed Process alarm operation, see Fig. 4.16,
page 80.
Set to 'On' to record all changes in the alarm state in the Alarm
event log – see Section 2.7, page 23.
Assign the alarm to one or more of 12 groups.
The alarm states assigned to each group are 'ORed' together to
create an internal digital signal that may be assigned to relays,
digital outputs or internal digital controls.
4 Configuration
83