Ordering Information For Options Using Codes - Siemens SIMOREG DC Master 6RA7028-6DS22 Operating Instructions Manual

02.00
2.2

Ordering information for options using codes

6 R A 7 0
Options
Technology software in the basic converter ("Free function
blocks")
Module terminal expansion (CUD2)
SIMOVIS PC - PMU (RS232) connecting cable, 3m
SU1 RS232 - RS485 iInterface converter, including mounting
accessories, main connection: 1CA 115V / 230V
User-friendly operator control panel (OP1S)
AOP1 adapter for mounting OP1A in cubicle door, including
5 m connecting cable
PMU-OP1S connecting cable, 3m
PMU-OP1S connecting cable, 5m
LBA Local bus adapter for the electronics box
LBA is always needed to install supplementary boards
(see Section 5.2.2)
ADB Adapter board
ADB is always needed to install CBC, CBP, EB1, EB2,
SBP and SLB boards
SBP Pulse encoder evaluation board
(miniature-format board; ADB required)
EB1 Terminal expansion board
(miniature-format board; ADB required)
EB2 Terminal expansion board
(miniature-format board; ADB required)
SLB SIMOLINK board
(miniature-format board; ADB required)
CBP2 Communications board with interface for SINEC- L2-
DP, (PROFIBUS)
(miniature-format board; ADB required)
CBC Communications board with interface for CAN protocol
1) 3)
(miniature-format board; ADB required)
CB1 Communications board with interface for SINEC- L2-DP
3)
(PROFIBUS)
The replacement CBP board should be used for new
applications
Operating instructions (german and english)
Siemens AG 6RX1700-0AD76
SIMOREG DC Master Operating Instructions
1) 2) 3)
3)
3)
1) 3)
1) 3)
0 Z
SIMOREG converter order no. with suffix Z
and
codes (several codes together) and/or
plaintext (if required)
Codes
S00
K01
-
-
Type spectrum
Order No.
6RX1700-0AS00
6RX1700-0AK01
6SX7005-0AB00
6SX7005-0AA00
6SE7090-0XX84-2FK0
6SX7010-0AA00
6SX7010-0AB03
6SX7010-0AB05
6SE7090-0XX84-4HA0
6SE7090-0XX84-0KA0
6SX7010-0FA00
6SE7090-0XX84-0KB0
6SE7090-0XX84-0KC0
6SX7010-0FJ00
6SX7010-0FF05
6SX7010-0FG00
6SE7090-0XX84-0AK0
6SE7087-6CX84-0AK0
2-5