Installing A Power Supply Unit - Dell EMC PowerEdge R940 Installation And Service Manual

Figure 88. Removing a power supply unit
Next steps
Install the PSU.
Related links

Installing a power supply unit

Installing a power supply unit
The procedure for installing AC and DC PSUs is identical.
Prerequisites
1 Follow the safety guidelines listed in
2 For systems that support redundant PSU, ensure that both the PSUs are of the same type and have the same maximum output
power.
NOTE: The maximum output power (shown in watts) is listed on the PSU label.
Steps
Slide the PSU into the system until the PSU is fully seated and the release latch snaps into place.
136 Installing and removing system components
Safety instructions.