Installing The Expansion Card Riser - Dell EMC PowerEdge R940 Installation And Service Manual

Next steps
Install the expansion card riser.
Related links

Installing the expansion card riser

Installing the expansion card riser
Prerequisites
Follow the safety guidelines listed in
Steps
1 Align the guide rail on the side of the riser with the slot on the side of the chassis and lower the riser into the system.
2 Lower the release lever until the connector on the riser connects with the connector on the processor expansion module (PEM).
CAUTION: To avoid damage to the connectors on the PEM, you must only use the release levers to seat the expansion
card risers firmly on the PEM.
Figure 74. Installing expansion card riser (right)
Safety instructions.
Installing and removing system components 121