Optional) Installing The Rf Surge Protector And Cables - Huawei DBS3900 Installation Manual

DBS3900 LampSite
Installation Guide
13
This section describes how to install an RF surge protector and its cables in the cabinet. When
the pRRU is installed outdoors, an RF surge protector is required to provide surge protection
for the RF port.
Procedure
Step 1 Install the PGND cable and the RF jumper connected to the Protect port. See Figure 13-1.
Figure 13-1 Installing the PGND Cable and RF Jumper (1)
Step 2 Install the RF surge protector in the cabinet. See Figure 13-2.
Issue 08 (2016-05-30)
(Optional) Installing the RF Surge
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 (Optional) Installing the RF Surge Protector and
Protector and Cables
Cables
237