Installing Rhub Cables; Requirements For Cable Layout - Huawei DBS3900 Installation Manual

DBS3900 LampSite
Installation Guide
Figure 6-27 Installing an RHUB on a wall
----End

6.4 Installing RHUB Cables

This section describes how to install cables for an RHUB.

6.4.1 Requirements for Cable Layout

Cables must be routed according to the specified cabling requirements to prevent signal
interference.
Issue 08 (2016-05-30)
As shown in the preceding figure, when the RHUB is placed against the wall, ensure that the RHUB
panel is vertical to the ground and the PSU is on the lower part of the RHUB panel.
If a cable listed below is not required, skip the requirements for routing the cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing an RHUB
34