Power Supply Specifications - Mitsubishi Electric GOT1000 General Description Manual

*1 Bright dots (always lit) and dark dots (unlit) may appear on a liquid
crystal display panel due to its characteristics. It is impossible to
completely avoid this symptom, as the liquid crystal display
comprises of a great number of display elements. Flickers may be
observed depending on the display color. Please note that these dots
and flickers appear due to its characteristic and are not caused by
product defect.
*2 The GOT screen saving/backlight off function prevents images from
becoming permanently etched on the display screen and increases
the backlight life.
*3 ROM in which new data can be written without deleting the written
data.
*4 Compliant with IP67 when the USB environmental protection cover is
attached. Compliant with IP2X at the USB interface only when a
USB cable is connected. Note that this does not guarantee all users'
operation environment.
*5 For using multiple extension units, a bar code reader, or a RFID
controller, the total current for the extension units, bar code reader, or
RFID controller must be within the current that the GOT can supply.
For the current for the extension units, bar code reader or RFID
controller, and the current that the GOT can supply, refer to the
following manual.
*6 The GT1555-V can be operated with a stylus pen.
With a stylus pen, small-sized touch switches can be certainly
operated.
Use a stylus pen that satisfies the following specifications.
Material: Polyacetal resin

3.3 Power Supply Specifications

The following describes the power supply specifications for the GT15.
Remarks
Operation at momentary failure
• If an instantaneous power failure occurs in the power supply and continues for
more than the permissible period, the GOT will be reset.
• Make sure to power on the unit more than 5 seconds after power-off.
GT Designer2 Version
3.3.1 For GOTs powered from the 100 to 240VAC power
supply
3.3.2 For GOTs powered from the 24VDC power supply
Screen Design Manual
Pen tip radius: 0.8mm or more
26