Part Names And Settings Of The Gt155 - Mitsubishi Electric GOT1000 General Description Manual

2.5 Part Names and Settings of the GT155

2),3)
1)
13)
No. Name
1) POWER LED
2) Display screen
3) Touch key
4) USB interface
5) RS-232 interface
6) Power terminal
7) Extension interface
8) CF card interface
9) CF card access LED
10) CF card access switch
Optional function board
11)
interface
12) Reset switch
13) Hole for unit installation fitting
14) Battery holder
15) Protective ground terminal
4)
5) 14) 6)
Lit in green:Power is correctly supplied
Lit in red:Screen saving
Blinks in red:Blown back light bulb
Not lit :Power is not supplied
Displays the Utility and the user creation screen
For operating touch switches in the Utility and the user creation screen
For connecting a personal computer
(Connector type: MINI-B)
For communicating with a controller or connecting a personal computer
(Connector type: D sub 9-pin)
Power input terminal, FG terminal
For installing an extension unit
For installing a CF card
Lit :CF card accessed
Not lit:CF card not accessed
Used for stopping the access to the CF card before removing the CF
card from the GOT
ON :CF card being accessed
(CF card removal prohibited)
OFF :CF card not accessed
(CF card removal possible)
For installing the optional function board
Hardware reset switch
(Inoperative in the bus connection or with the bus connection unit
installed)
Hole for inserting the unit installation fitting
Houses the battery
For earthing
7
GOT Rear face
7)
15)
11)
13)
Description
8)
9)
10)
12)