Line Buttons; Pooled Co Line Button; Group Co Line Button; Live System Programming - Toshiba IP edge General Description Manual

• Manage mailbox personal greeting and name recordings
• Manage mailbox password.
• Setup IPMobility's Make Call functionality, e.g. Call-thru, Callback.

Line Buttons

Pooled CO Line Button

Pooled line keys are used to provide a key appearance for a single URI, DNIS, or DID
number expected to handle one call at a time.

Group CO Line Button

Group CO keys are used to provide several key appearances for one or more URI, DNIS,
or DID numbers expected to handle multiple calls at one time. Group CO line buttons are
like individual CO line buttons except these buttons represent all the lines for a particular
Channel Group. This enables channels to operate similar to analog CO lines on a key tele-
phone system.
These buttons may have appearances on multiple telephones providing call coverage
across several telephones. Multiple appearances of the same Group CO line button is pos-
sible on each phone to allow multiple call handling for that group from each station.
A DSS Button is NOT a line button
Note

Live System Programming

Programming IPedge from an on-site or off-site location does not interrupt the operation of the
system, in most cases. It is interrupted for hardware upgrades and may be interrupted for some
software upgrades.

Meet-Me Audio Conference

Refer to the "Meet-Me Audio Conference Application" on page

Meeting

Refer to the "Meeting" on page 40

Message Waiting

Any station and most voice mail devices can turn on a message waiting indicator for a des-
ignated IP5000-series telephone. This feature can be disabled in station programming.
IPedge General Description
covered in
03/16
39.
Chapter 3 – Unified Communications.
Features
Line Buttons
79