Power Considerations; Ups Recommendation; Ipedge Virtual Server Power Supply; Station Dimensions - Toshiba IP edge General Description Manual

Appendix – Specifications

Power Considerations

Power Considerations
The IPedge server should have a dedicated AC power circuit. The specific input voltage and
current requirements for each server is listed the specifications for each model.

UPS Recommendation

Toshiba recommends an Uninterruptible Power Supply (UPS) with power conditioning for the
IPedge server. The recommended UPS from ONEAC are shown in the
shown in the table include power conditioning.
Table 6 IPedge System Power Conditioner and UPS
Power Conditioner
Battery
Backup Time

IPedge Virtual Server Power Supply

The input power for the IPedge Virtual servers ranges from 100~240V and 50~60 Hz. The Virtual
EM Server has redundant, hot swap power supply. This server supports the Hot Spare feature that
reduces the power overhead associated with power supply redundancy.

Station Dimensions

Dimensions for the 5000-series, IP telephones and related equipment are listed in
Table 7 Station Dimensions
IP5022-SD, IP5122-SD, IP5122-SDC, IP5132-SD, IP5522-
SD, IP5622-SD, IP5131-SDL [15-degree tilt], IP5531-SDL,
IP5631-SDL
IP Direct Station Selection (DSS) Console - IDM5060
[15-degree tilt]
Add-on Module (KM5020, LM5110) [15-degree tilt]
Direct Station Selection (DSS) Console (DDM5060)
[15-degree tilt]
114
PC180A-S2S
30 Minutes ON700XAU-SN
1 Hour ON700XAU-SN1
2 Hours ON700XAU-SN1
4 Hours ON700XAU-SN1
8 Hours ON700XAU-SN2
Device
IPedge Server
EC
PC360A-S4S
ON700XAU-SN
ON700XAU-SN1
ON700XAU-SN1
ON700XAU-SN2
ON700XAU-SN4
Height
Inches mm
5.1 129
4.0 102
4.0
102
Table 6 below. The UPS
EM
PC075A-S2S
ONE254AG-SE
ONE254AG-SE
ONE604AG-SE
ONE300XAU-W-SV1
ONE300XAU-W-SV1
Table
Width
Inches mm Inches
10.16 258 6.10
10.16 258 6.10
3.54 90
6.10
10.16 258
IPedge General Description
EP
7.
Depth
mm
155
155
155
03/16