ABB COM600 Series User Manual page 69

1MRS756567
Code Function
5 Direct operate
6 Direct operate - no
ack
7 Immediate Freeze
8 Immediate Freeze
-no ack
9 Freeze and Clear
10 Freeze and Clear -
no ack
11 Freeze with time
12 Freeze with time -
no ack
13 Cold Restart Per-
form the desired
reset sequence
Respond with a
time object Yes
14 Warm Restart
15 Initialise Data to
Defaults
16 Initialise Application
17 Start Application
18 Stop Application
COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual
Description
Set the output directly
Respond with status of control point
Set the output directly
No respond
Freeze Function Codes
Copy the specified objects to freeze buffer
Respond with status of operation
Copy the specified objects to freeze buffer
No respond
Copy the specified objects to freeze buffer and clear objects
Respond with status of operation
Copy the specified objects to freeze buffer and clear objects
No respond
Copy the specified objects to freeze buffer at specified time
Respond with status of operation
Copy the specified objects to freeze buffer at specified time
No respond
Application Control Function Codes
Perform the desired partial reset operation
Respond with a time object
Initialise the specified data to default
Respond with the status of operation
Prepare the specified application to run
Respond with the status of operation
Start the specified application to run
Respond with the status of operation
Stop the specified application to run
Respond with the status of operation
Configuration Function Codes
Supported
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
No
No
69