ABB COM600 Series User Manual page 25

1MRS756567 COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual
Name
Pulse Length Off For Control
Relay Output Block
Pulse Length On For Control
Relay Output Block
Static Datapoll
Time Synchronization Function
Time Synchronization Interval
Transport Layer Timeout
Control Authorization
Station/Remote Switch OPC
Path
Command Handling
Command Address
Maximum Response Time
Value or Value range / Default
0 to 65535
Default: 0
0 to 65535
Default: 0
True
False
Default: True
Direct time synchronization
Delay compensated time syn-
chronization
Default: Direct time synchroniz-
ation
0 to 65535
Default: 0
0 to 600
default: 0
0 to 65535
Default: 32000
0 to 600
Default: 15
Description
Length of pulse, in milli-
seconds, used in the output
commands of the control relay.
Length of pulse, in milli-
seconds, used in the output
commands of the control relay.
When True, a static poll (class
0) poll request is always sent
when the object status of the
DN Master station gets the
value zero (0).
Function code for time Syn-
chronization.
Time in seconds between
device time updates.
Maximum time in seconds that
the transport layer is allowed to
assemble message fragments.
OPC path of the station remote
switch position used with this
device. The format is:
Node#ProgID For OPC
Server#Channel Name\IED
Name\Logical Device
Name\Logical Node
Name\Data Object Name
For example:
GW#ABB.MOD-
BUS_SERIAL_OPC_DA_
Server.Instance1#Chan-
nel1\IED1\LD1 \GGIO1\loc
The object address of the bit-
stream process object.
The maximum time in seconds
that the master station waits for
a response to a command from
the slave.
25