NEC UNIVERGE UM8000 User Manual page 389

Call Management > Transaction Boxes
Field
Allow callers to change
messages they just
recorded
Allow callers to leave
urgent messages
Maximum message
length to record from an
unidentified caller...
seconds
After taking a message
Page Field Descriptions
Description
Select to let callers change messages they have just
recorded. Clear to prevent message changes.
Select to ask unidentified callers if they want to mark a
message as urgent. Clear to prevent unidentified callers from
marking messages as urgent.
Mark all messages urgent. Select to mark all messages
from unidentified callers as urgent.
Specify the maximum length, in seconds, of a message from
an unidentified caller. This setting applies only if the selected
action is Take a message.
Specify what the system does after recording a message
from a caller. This setting applies only if the Take a
message action was selected on the Greetings page for this
transaction box. Select one of the following:
• Route to. Routes the caller to another
selected, type the system ID or click Search and select a
system ID.
• Route to operator.
operator box.
• Hang up. Disconnects without saying good
• Say bye. Plays a prompt asking if the caller needs
further assistance, pauses to wait for the caller to make a
selection, if there is no response, says good-bye and
disconnects.
• Restart. Returns the caller to the opening greeting box.
Messages
-
system ID. If
Routes the caller to the system
-
bye.
389