Mitsubishi Electric GOT2000 Series Connection Manual page 50


Communication monitoring function
The communication monitoring is a function that checks whether the PLC can communicate with the GOT.
If this check ends successfully, it means correct communication interface settings and proper cable connection.
Display the communication monitoring function screen by [Main Menu]
For details on the communication monitoring function, refer to the following manual:
(Operation of communication monitoring function screen)
Main Menu
Touch
[Comm. Setting].

Write data to virtual devices inside GOT (For microcomputer connection)
Send a message from the host to the GOT, and confirm that the values are stored in the virtual devices inside the
GOT.
( 2.7 System Configuration Examples)
Write command
S
RW 0100
T
X
1 - 26
1. PREPARATORY PROCEDURES FOR MONITORING
1.6 Checking for Normal Monitoring
GOT2000 Series User's Manual (Utility)
E
000A 0163 0362 D3
T
X
Microcomputer board
Comm. Setting
Touch
[Comm. Monitor].
Comm. Monitor
[Comm. Setting] [Comm. Monitor].