Routing Parameter Setting - Mitsubishi Electric GOT2000 Series Connection Manual

8.3.6

Routing parameter setting

Up to 64 [Transfer Network No.]s can be set.
However, the same transfer network number cannot be set
twice or more (multiple times).
Therefore, the one that can access to other station from the
request source host GOT is 64 kinds of [Transfer Network
No.]s.
POINT POINT POINT
Routing parameter setting
When communicating within the host network, routing
parameter setting is unnecessary.
For details of routing parameters, refer to the following
manual.
Manuals of SLMP equipment
Item
Transfer Network No.
Relay Network No.
Relay Station No.
Range
1 to 239
1 to 239
1 to 64
POINT POINT POINT
(1) Routing parameter setting of relay station
Routing parameter setting may also be necessary
for the relay station. For the setting, refer to the
following.
Manuals of SLMP equipment
(2) Parameter reflection function of MELSOFT
Navigator
(a) The color of the cells for the items which are
reflected to GT Designer3 from MELSOFT
Navigator changes to green. Set items, which
are displayed in green cells, from the
MELSOFT Navigator.
(b) When the settings of Transfer network No.,
Relay network No. or Relay station No. are
reflected to the parameter from the MELSOFT
Navigator, those settings are added. Items set
in advance are not deleted.However, if the
target network No. overlaps, the item set in
advance is overwritten.
(c) The routing information is used manually by
the user when the data is created. Therefore,
after changing the network configuration by
MELSOFT Navigator, create a routing
information again. For details of the creation
of the routing information, refer to the
MELSOFT Navigator help.
8. SLMP CONNECTION
8.3 GOT Side Settings
8
8 - 7