Setting The Current Date And Time - Mitsubishi Electric AG-150A Instruction Book

3-9

Setting the Current Date and Time

Click the menu item [System Settings] and the Date/Time Setting screen will appear. Enter the current date
and time and then press the [Save settings] to set it.
Note: The clock setting made on the screen below will be reflected on the clocks on other units that are connected
to the M-NET line, on the Expansion Controllers (PAC-YG50ECA), and on the AG-150A controller whose
"Time master setting" is set to Sub (with someexceptions).
Note: In the system with TG-2000A, make the settings on TG-2000A.
CAUTION
Summer time
setting
Click to set the daylight
saving time.
Refresh
Acquires the current
Date and Time from
AG-150A.
Item
Current date/time
Save Settings
Refresh
Summer time setting
Date and clock settings on Expansion Controllers (PAC-YG50ECA), when connected, must be made
with the Expansion Controller properly connected to ensure proper settings.
Enter the current date and time.
Click the [Save Settings] to set the current date and time.
Acquires the current Date and Time from AG-150A.
Click and tick the "Automatically adjust clock for daylight saving changes" box to adjust the
daylight saving time automatically, and select the applicable country.
Note: If the applicable country is not in the selection bar, select "Custom Settings". Click
"Custom Settings" button that will appear on the right to set the daylight saving time.
Description
Custom Setting Screen
42
Current date/time
Enter the current date and time
here.
Save settings
Click to set the current date and
time.
Daylight saving
date and time
Set the daylight
saving time.