Mitsubishi Electric AG-150A Instruction Book page 18

Item
Click
Air direction
Click
Fan speed
Select the items you do not want the remote controller to control. Click the word part of [ON/
OFF], [Mode], [Set Temp] or [Filter Sign] and switch to prohibit
Prohibit remote
controller
operation
Schedule
Click the button to select Available or Not Available for the schedule settings.
Available/Not Available
Click [Reset] to specify whether to reset the filter sign. It is set to reset when a green indicator is
Filter sign
displayed on the left of Reset ([ Reset]).
Click [Reset] to specify whether to reset the check water circuit.
It is set to reset when a green indicator is displayed on the left of Reset ([ Reset]).
Check water circuit
Click [ON] or [OFF] to switch interlocked ventilator ON or OFF.
Interlocked ventilator
ON/OFF *1
Fan speed of
Click
interlocked
ventilator
*1: The change on the interlock setting between the indoor and LOSSNAY units made on the indoor unit side will
not be reflected on the LOSSNAY unit side on the screen until the OK is pressed and the change is saved. The
actual interlock setting, however, is immediately effective, so as soon as the interlock setting on the indoor unit
side is set to ON, the LOSSNAY unit will go into operation when one or more indoor units go into operation
regardless of the display on the screen.
to adjust the air direction.
(Mid3) (Mid 2)
Note: If it is a model that does not support air direction adjustment, this item is not displayed.
Note: Available functions vary depending on the unit model.
to adjust the fan speed.
(Low) (Mid 2)
Note: If it is a model that does not support fan speed adjustment, this item is not displayed.
Note: Available functions vary depending on the unit model.
Note: For K control models, it is only possible to prohibit all items or enable all items.
Note: For K control models, there is no [Filter Sign] item.
Note: For ventilator models, there are no [Mode] item or [Set Temp] item.
Note: For the Air To Water (PWFY) groups, the "[Check Water Circuit] (circulating water
replacement sign reset) " function can be enabled or disabled, instead of the [Filter
Sign] reset function.
Note: If filter signs are not triggered in the group, then this item is not displayed.
Note: If check water circuit signs are not triggered in the group, then this item is not
displayed.
Note: Only when Air To Water (PWFY) is connected, this item is displayed.
Note: For groups that are not connected to an interlocked ventilator, the items related to
interlocked ventilators are not displayed.
to adjust the fan speed of the interlocked ventilator.
Note: For groups that are not connected to an interlocked ventilator, the items related to
interlocked ventilators are not displayed.
Description
(Mid 1) (Mid 0) (Horizontal)
(Mid 1) (High)
18
(Swing)
(Auto)
or enable
(Auto)
.