Table of Contents
Advertisement
GE Grid Solutions
Chapter 4:
D25 Software
D25 Software
The D25 is factory configured and tested. It contains all software required to
be a fully functional system and upload and download configuration
databases.
You may need to download configuration files to your D25:
•
If the D25 has performed self-diagnostics and determined that the FLASH
memory is either erased or corrupted
•
Other test messages indicate that the FLASH memory has been erased or
corrupted
•
After maintenance or replacement work which has deleted the FLASH code files
Use this section as a guide for:
•
An overview of the software and software tools you will use
•
Information and procedures for maintaining code and configuration files
•
How to test the functionality of the inputs and outputs controlled by the D25
Plant I/O
A discussion of code and configuration files
•
•
How to remove configuration files from memory
•
How to install new or replacement code files using a serial connection
Overview
The D25 system software consists of two distinct components:
1. Base System
2. Applications
Base System
The Base System Software resident in the D25 provides a consistent, stable
Software
operating environment for the Applications that provide specific functionality
to the D25.
The Base System Software consists of:
•
Software that is resident on the BootROM
•
Base Applications that are required for the operation of the hardware.
GE Information
Configuring the D25 Software
994-0081-3.00-21
D25
User's Manual
93
Hide quick links:
Advertisement
Table of Contents
