Disposal; Information On Weee Directive 2002/96/Ec (Waste Electrical And Electronic Equipment); Use In Potentially Explosive Atmospheres - ABB PositionMaster EDP300 Operating Instruction

1.14 Disposal

This product is manufactured from materials that can be
recycled by specialist recycling companies.
1.14.1 Information on WEEE Directive 2002/96/EC (Waste
Electrical and Electronic Equipment)
This product is not subject to WEEE Directive 2002/96/EC or
relevant national laws (e.g., ElektroG in Germany).
2 Use in potentially explosive
atmospheres
Change from one to two columns
Depending on the type of explosion protection, an Ex name
plate is attached to the positioner, to the left of the main name
plate. It indicates the level of explosion protection and the
device's relevant Ex certificate.
Requirements / preconditions for safe operation of the
positioner:
IMPORTANT (NOTE)
Observe the device's applicable technical data
and special conditions in accordance with the
relevant certificate.
— Manipulation of the device by users is not permitted.
Modifications to the device may only be performed by the
manufacturer or an explosion protection specialist.
Change from two to one column
The product must be disposed of at a specialist recycling
facility. Do not use municipal garbage collection points.
According to the WEEE Directive 2002/96/EC, only products
used in private applications may be disposed of at municipal
garbage collection points. Proper disposal prevents negative
effects on people and the environment, and supports the
reuse of valuable raw materials.
If it is not possible to dispose of old equipment properly, ABB
Service can accept and dispose of returns for a fee.
— The device may only be supplied with instrument air that is
free of oil, water, and dust.
— During operation with flammable gas, the device must be
used in accordance with the approval specifications.
IMPORTANT (NOTE)
Use in areas with combustible dust
— To prevent loss of its type of protection, the
housing may not be opened.
— Use only cable glands that conform to degree
of protection ≥ IP 65.
— Avoid hazardous sliding brush discharges.
PositionMaster EDP300 | OI/EDP300-EN 9