ABB ACS800 Hardware Manual page 39

Selection
Line options
Version
Cabling
Auxiliary voltage
Cabinet options
Language of manuals
Starter of auxiliary motor
fan
Alternatives
F250 = main contactors inside the DSU modules
F253+F260 = aR AC fuses + main switch-disconnector (6-pulse) (Main
switch-disconnectors in DSU modules removed)
A004+F253+F260 = aR AC fuses + main switch-disconnector (12-pulse)
(Main switch-disconnectors in supply modules removed) (with +C129 and
+C134, second cubicle for main switch-disconnector added)
F255+F260 = main breaker (6-pulse only) (Not available with frame
1×D4 + n×R8i) (Main switch-disconnectors and main contactors in supply
modules removed)
F259 = grounding switch (only with +F253 or +F255) (Not available with
+C129 or +C134)
V992 = DSU version 2 not backward compatible with those diode supply
units that are not marked with the +V992 code
H351 = top entry (IP54 and IP54R require +F253 or +F255)
H353 = top exit
H358 = US/UK gland/conduit plate (standard with +C129 and +C134)
H359 = common motor terminal cubicle
G304 = 115 VAC auxiliary voltage (standard with +C129 and +C134)
G300 = cabinet heaters (external supply) (Not available with option
+C129 or +C134)
G313 = motor heater output (external supply)
G307 = terminals for external control voltage (UPS)
G317 = busbar supply conductors (6-pulse only) (Requires option +F253
or +F255)
G330 = halogen-free wiring and materials (Not available with option
+C129 or +C134)
G338 = additional wire markings (Equipment pin numbers are printed on
wires between modules and on wires connected to equipment.)
G339 = additional wire markings (Equipment and terminal block pin
numbers are printed on wires between modules and on wires connected
to equipment and terminal blocks. Main circuit conductors are marked.)
G340 = additional wire markings (Equipment pin numbers are marked
with rings on wires between modules and on wires connected to
equipment, terminal blocks and detachable screw terminals. Main circuit
conductors are marked.)
G341 = additional wire markings (Equipment identifications and terminal
block pin numbers are marked by rings on optical fibres, on wires
between modules, and on wires connected to equipment, terminal blocks
and detachable screw terminals. Main circuit conductors and also short
and obvious connections are marked.)
G342 = additional wire markings (Equipment identifications and terminal
block pin numbers and remote addresses are marked by rings on optical
fibres, on wires between modules, and on wires connected to equipment,
terminal blocks and detachable screw terminals. Main circuit conductors
and also short and obvious connections are marked.)
Rxxx
Refer to ACS800 Ordering Information (3AFY64556568 [English]).
M602 = 2.5 ... 4 A (1, 2 or 4 pcs)
M603 = 4 ... 6.3 A (1, 2 or 4 pcs)
M604 = 6.3 ... 10 A (1, 2 or 4 pcs)
M605 = 10 ... 16 A (1 or 2 pcs)
M606 = 16 ... 25 A (1 pc)
39
Hardware description