Materials; Tightening Torques For Power Connections - ABB ACS800 Hardware Manual

Contamination levels
(IEC 60721-3-3, IEC 60721-3-
2, IEC 60721-3-1)
Atmospheric pressure
Vibration (IEC 60068-2)
Shock (IEC 60068-2-27)
Free fall

Materials

Cabinet
Busbars
Fire safety of materials
(IEC 60332-1)
Packaging
Disposal

Tightening torques for power connections

Screw size Torque
No conductive dust allowed.
Boards without coating:
Chemical gases: Class 3C1
Solid particles: Class 3S2
Boards with coating:
Chemical gases: Class 3C2
Solid particles: Class 3S2
70 to 106 kPa
0.7 to 1.05 atmospheres
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
2
max. 7 m/s (23 ft/s
(13.2 to 100 Hz) sinusoidal
Not allowed
Not allowed
Hot-dip zinc-coated (thickness approx. 20 µm) steel sheet (thickness 1.5 mm) with
polyester thermosetting powder coating (thickness approx. 80 µm) on visible surfaces
except back panel. Colour: RAL 7035 (light beige, semigloss).
Tin- or silver-plated copper
Insulating materials and non-metallic items: Mostly self-extinctive
Frame: Wood or plywood. Plastic wrapping: PE-LD. Bands: PP or steel.
The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All
metal parts can be recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most recyclable parts are marked
with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit
boards can be landfilled. The DC capacitors (C1-1 to C1-x) contain electrolyte and the
printed circuit boards contain lead, both of which are classified as hazardous waste within
the EU. They must be removed and handled according to local regulations.
For further information on environmental aspects and more detailed recycling instructions,
please contact your local ABB distributor.
M5 3.5 Nm (2.6 lbf.ft)
M6 9 Nm (6.6 lbf.ft)
M8 20 Nm (14.8 lbf.ft)
M10 40 Nm (29.5 lbf.ft)
M12 70 Nm (52 lbf.ft)
M16 180 Nm (133 lbf.ft)
Boards without coating:
Chemical gases: Class 1C2
Solid particles: Class 1S3
Boards with coating:
Chemical gases: Class 1C2
Solid particles: Class 1S3
70 to 106 kPa
0.7 to 1.05 atmospheres
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
2 2
) max. 7 m/s (23 ft/s
(13.2 to 100 Hz) sinusoidal
2
Max. 100 m/s
11 ms
100 mm (4 in.) for weight
over 100 kg (220 lb)
Boards without coating:
Chemical gases: Class 2C2
Solid particles: Class 2S2
Boards with coating:
Chemical gases: Class 2C2
Solid particles: Class 2S2
60 to 106 kPa
0.6 to 1.05 atmospheres
Max. 3.5 mm (0.14 in.)
(2 to 9 Hz),
2
) max. 15 m/s
(9 to 200 Hz) sinusoidal
2
(330 ft./s ), Max. 100 m/s
11 ms
100 mm (4 in.) for weight
over 100 kg (220 lb)
135
2 2
(49 ft/s )
2 2
(330 ft./s ),
Technical data