Diagnostic Reports - Sanyo SFX-30 Instruction Manual

36
Diagnostic reports
The codes shown below appear on the activity and transmission reports to help you diagnose any problems
quickly and accurately.
*
ERROR CODE
OK:
I
10:
21:
23:
24:
25:
h
27:
I
30:
I
40:
I
50:
DESCRIPTION
Transmission/reception satisfactory.
No response from other party. Contac~ other party to make sure other machine is
ready to receive.
Make sure the telephone line is connected to "LINE" on the rear of the SFX-30.
No response (to timer' transmission).
~~q key pressed during-transmission/reception.
Original document jammed. Remove and replace correctly.
—
Recording paper ran out during reception. Replace recording paper.
Recording paper jams during reception. Check the recording paper.
Cutter did not work during reception. Contact your dealer.
Timer transmission canceled or no original inserted for timer transmission.
—
Printing quality poor due to poor telephone line connection. If this code appears
frequently, contact an authorized Sanyo service center.
Other party's fax machine in abnormal condition (no recording paper, etc.) Contact
the other party.
Transmission was halted by the other party or their fax machine. (Line was
disconnected during transmission /reception.)
Communication impossible due to poor phone line.
Communication impossible due to compatibility problems. Contact other party.
Also make sure feature switch No. 26 position.